ICC-ZS2 Zenith SuperPort Card

Specifications

Models

ICC1-ZS2: Zenith SuperPort Card, 1-way coax
ICC2-ZS2: Zenith SuperPort Card, 2-way coax

Physical

Size: 1.12" [29mm] wide x 3.73" [95mm] height x 5.95" [151mm] deep
Weight: 5 oz [143g]
Enclosure: All aluminum with durable black powder coat paint
Mounting: Inserts into SuperPort slot of Zenith TVs, replaces card included with TV

Front Panel Status

Net LED: Green LED for iC-Net bus, flashes once per second if receiving communication
TV LED: Yellow LED stays on, flashes when receiving IR data, off when Smart data
connection is not active
ERR LED: Red LED indicates a problem within the unit

Connections

Ant/Cable: 'F', female, 75 ohm impedance, RF from CATV system
iCC-Net: Carried over the same RF coax connection as TV channels
Receive: Mid-band VHF, 74.7MHz, sent from IC Head-End Network Controller
-25 to +35 dBmV signal level
Transmit: Sub-band, 5.6MHz sent to Head-End Network Controller
+/- 80 KHz max carrier deviation, +49dBmV nominal
RF Out: Internal RCA female, 75 ohm impedance, RF to TV
Ground: Internal lug for TV GND wire
Power: Powered by TV

Options

IC-RC Wireless IR Remote for user control and system setup
Internal buzzer used for system-activated alerts

© 2008 Contemporary Research Corporation. All rights reserved.